Model assessment · Elite

Elite Rivo with Zwift Cog and Click review

A US Zwift Ready direct-drive smart trainer package with pre-installed single-speed Cog and Click controller, Wi-Fi and estimated power reporting.

Sources checked 2026-10-29 · Our editorial approach

Review the exact model, limitations and buying checks on BuyerShortlists before choosing a seller. We may earn from qualifying purchases.

Elite Rivo direct-drive trainer with orange Zwift Cog installed.
Rivo with Cog pictured; Click controller is not shown. Image: Elite
A useful fit for

A candidate if the rider wants a compact direct-drive platform with the Zwift Cog/Click package supplied and intends to use the supported virtual-shifting setup.

The main tradeoff

The included single-speed Cog is not a conventional cassette, Click functions depend on compatible software and firmware, and Elite's page and US importer differ on the drivetrain-speed range.

Your needs, this model

Does it fit your priorities?

Does this package include Zwift Cog and Click?

Yes. The US importer identifies 0241002EXUE with Cog and Click supplied. Confirm the exact box and current app/firmware support before ordering.

Explore this need in the finder →
Will every 8–13-speed bike fit the included Cog?

Do not treat the range as universal. Elite states 8–13 speeds, while its US importer states 8–12; use the narrower range as a conservative screen and confirm your exact bicycle, chain and drivetrain.

Explore this need in the finder →
Is an ordinary cassette already included?

No. The included Cog is a single-speed Zwift component, not a multi-sprocket cassette. Elite says it can be removed for a standard cassette, which must be chosen separately.

Explore this need in the finder →

This Rivo package comes with the single-speed Zwift Cog and handlebar-mounted Click controller, so its buying decision differs from the standard Rivo that expects a cassette chosen separately. Elite’s US importer identifies the Zwift Ready package as 0241002EXUE. The common trainer platform retains Rivo’s estimated power and 18% grade claims; the included virtual-shifting hardware is the main functional package difference. This is a source-based review, not a ride test.

One cog, a controller and a software condition

The Zwift Cog is installed where a multi-sprocket cassette would normally sit. The Click controller gives access to Zwift’s virtual gears and supported app controls from the handlebar. Elite’s product page describes 24 virtual gears and a broad 8–13-speed bicycle range; the official US importer lists 8–12-speed drivetrains. This mismatch is worth treating cautiously, so the narrower 8–12 range is the safer purchase check for this US package. Neither range is a fit guarantee for your exact bike: check chain, frame, drivetrain subtype, firmware and the manufacturer’s compatibility advice.

Elite says the Cog can be removed and a standard cassette installed for use in the trainer’s standard configuration. That option may be useful if you switch away from virtual shifting, but the cassette itself and exact freehub fit are separate decisions. The Cog-and-Click box should not be confused with the cassette-free Rivo base, nor with a conventional cassette package. The Click’s virtual-shifting behavior depends on compatible software, hardware and current firmware; confirm the functions you need in the app you plan to use rather than reading “Zwift Ready” as universal app control.

Rivo’s published limits remain the same

Elite specifies an estimated power accuracy of ±2.5%, a maximum of 2,000 watts at 40 km/h and simulated grades up to 18%. The listed flywheel is 4 kg and the trainer weighs about 10 kg. Those are manufacturer values, not independent measurements. Resistance is electronically controlled, and Elite describes automatic calibration, Easy Start, Bluetooth, Wi-Fi and Zwift Protocol BLE. Rivo’s page does not list ANT+ for this package; check that your intended training app or computer accepts the supported connection. Wi-Fi supports automatic firmware checks, which is useful only if the trainer can join the available 2.4 GHz network.

Compared with Avanti with Cog and Click, Rivo is the lower-spec smart platform on paper: Elite gives Avanti an integrated power meter with ±1% accuracy, 2,100 watts and 10 Hz data transmission, while Rivo’s power is estimated at ±2.5% and its maximum is 2,000 watts. The two Cog packages share the virtual-shifting concept, but that does not make their power reporting or data features interchangeable. Justo 2 with Cog and Click is another comparison if the higher 24% grade limit and heavier flywheel matter. The exact package and current availability should be checked separately for the United States.

Storage and ride preparation

Rivo’s foldable legs and integrated carry handle are practical when an indoor setup has to be moved or stored between rides. That convenience does not eliminate installation steps: this is direct drive, so you remove the rear wheel, install the trainer’s axle hardware and set up the chain on the Cog. Elite lists QR 130/135 mm and 12 × 142 mm adapters as included, with other sizes handled by available adapters. Check the exact bicycle and adapter set before purchase, and verify that the tire, frame and drivetrain are compatible with the single-cog configuration.

The powered trainer still needs the included AC adapter for app-controlled resistance. Elite also describes two stand-alone modes, but these do not mean the Click controls resistance when there is no compatible app. If you want to use a wide selection of apps with the bike’s physical cassette and shifters, compare the standard Rivo with a suitable separately purchased cassette. If you want a cassette-included trainer, Justo 2 is a different package, not an upgraded Rivo.

Who might choose this bundle?

It is worth considering if you want the lower-weight Rivo platform, app-controlled direct drive and virtual shifting ready in the reviewed box. It is a poor match for a rider who needs a conventional cassette in the package, a documented integrated power meter, grade simulation above 18%, ANT+ without confirmation, or a device/app combination that does not support the Click’s features.

Before ordering, confirm the 0241002EXUE SKU, Cog and Click contents, U.S.-app compatibility, drivetrain range, current firmware, axle adapter, cassette-conversion plan and seller terms. Elite’s US importer listing identifies the package and includes its stated Zwift promotion; do not assume that promotional or subscription terms will remain unchanged. The manufacturer image shows the trainer with Cog installed but not the controller or a particular bicycle. No ownership, hands-on setup, test, measured power/noise or customer experience is claimed.

Key specifications

Key details at a glance

Trainer setupDirect-drive / rear wheel removed
App-controlled resistanceYes
Manufacturer power accuracy2.5%
Manufacturer maximum resistance power2000 W
Maximum simulated uphill grade18%
Cassette included in reviewed packageNo
Included cassette/freehub standardpre-installed single-speed Zwift Cog; Cog removal permits compatible standard cassette
Zwift Cog and Click included in reviewed packageYes
Pre-installed Zwift Cog tooth count14 teeth
Manufacturer-documented virtual-shifting appsZwift
Manufacturer-stated virtual gear steps24 steps
Listed connection protocolsBluetooth / Wi-Fi / Zwift Protocol BLE
Listed ride metricspower estimate / speed / cadence
AC power adapter includedYes
Mains power required for powered resistanceYes

Use the exact model’s instructions for operating limits, supplied equipment and version differences.

Sources for this review

Sources for this assessment

See how this setup fits your own priorities.

The finder uses documented setup and feature differences. It is not a compatibility guarantee; verify your exact frame, drivetrain and supplied package.

In this review

Questions to consider for this model

Read the matching requirement, its tradeoffs and the other reviewed options.

More matching requirements
Combine my requirements →